• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 294 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5109B: Gate driver input resistance

Daniele Valente
Prodigy 140 points
Part Number: LM5109B
Other Parts Discussed in Thread: LM5109

Hello, 

checking the MPPT charge controller reference design for 12- and 24-V solar panels a RC filter has been added between the mcu and LM5109.

Is this RC (or only R) suggested when a 3.3V mcu is connected to LM5109?

Thank you

  • 0
    TI__Mastermind 21725 points

    Hello Daniele,

    When starting a new design, it is recommended to make provisions for a small R/C filter on the driver inputs in case there is high frequency noise induced on the driver input traces, or if there is ground bounce from the controller ground to the driver ground.

    The board layout details will determine if the R/C filters are necessary to prevent noise spikes on the driver inputs from possibly false triggering the driver.

    Confirm if this addresses your concerns, or you can post additional questions on this thread.

    Regards,