• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 277 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2611: LM2611

Zane Juste
Prodigy 10 points
Part Number: LM2611

Hello, I would like to make power supply with input voltage +5v and output voltage -12v ( 260mA). Can you help me with the circuit?

Thanks!

  • 0
    TI__Guru 61175 points

    Hello Zane,

    The design will be very similar to the one of the demoboard that you can order and review online.

    You need to make sure that the voltage rating of the external components is increased for the more negative output voltage, but other than this, the information in the datasheet and the users guide to the demo board should help you to easily finalize this task.