• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 254 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC27511A: 80W Gate Driver at 40MHz

Franz Schellhase
Expert 3605 points
Part Number: UCC27511A

Hi team,

A customer is looking for a gate driver for an 80W HF application at about 40MHz. So they are looking for a small bandwidth, high power gate driver. Can you recommend a part?

Thank you,

Franz

  • 0
    TI__Genius 13445 points

    Hi Franz, 

    Thanks for reaching out. 

    Assuming 40MHz switching frequency, and gate drive voltage <=5V (please confirm or correct me if I am wrong) to drive 0V referenced FETs, the devices below would be a good starting point. 

    You can find more on the link below and sort out by isolation requirements (I believe this application does not require isolation), topology (half-bridge or low-side) and gate charge, expected rise/fall times and gate drive voltage.

    http://www.ti.com/power-management/gate-drivers/overview.html

    Please let us know if you have additional questions or press the green if this addresses your inquiry.

    Regards,

    -Mamadou