• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 592 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A4701-EP: Simulation

Spencer Siu
Prodigy 70 points

Part Number: TPS7A4701-EP

I download the transient model for the tps7a4701 and used the .tsm file to create the model on TINA-9. When the I set the circuit up for astable operation, the transient analysis creates a plot where the y axis is all a single value. 

  • 0
    TI__Mastermind 29865 points

    Hey Spencer,

    When you add J1 connectors like that to all the voltage setting pins, you connect them all together, which is unlikely to be what you wanted to do.

    The reason that the y axis is all 1 value is because TINA auto zooms in on your waveforms and it looks like there wasn't much change in voltage in what you were measuring.

    You can always zoom out or change the y-axis values to fix this.

    Thanks,

    Daniel