LP5907-Q1: FIT Rate input parameters

Billyjoe Pecson

Part Number: LP5907-Q1

Hi, Good day!

Can someone please provide me the input parameters necessary for FIT rate calculations based on IEC 62380?

for example number of transistors inside the IC, technological structure( MOS? BICMOS?) , lambda3 classification(SO?), etc...

device is LP5907QMFX-2.5Q1 to be specific.

Thank you in advance!

Best regards,

Billy

Veoneer HW-E

over 4 years ago

0 Jason Song over 4 years ago

TI__Mastermind 23361 points

Hi Bily,

Please allow some time for us to investigate if we have standard answers prepared for this kind of calculation. If not, in order to help with your requests, please share with us the complete lists of things you would need for the calculation.

I will get back to you by Friday (11/15).

Regards,
Jason

0 Jason Song over 4 years ago in reply to Jason Song

TI__Mastermind 23361 points

HI Bily,

We have reached TI field people that support Veoneer JP account. They will help to provide you the data. I will have this post open until 11/22. If you have received the data, please let us know.

Regards,
Jason Song

0 Billyjoe Pecson over 4 years ago in reply to Jason Song

Prodigy 160 points

Hello Jason,

Thank you very much for the reply.

I have one more question, In case we used different standards for FIT rate calculation, is it also possible for TI to provide necessary input parameter?\

for example SN29500 or IEC61709?

Thank you and best regards,

Billy

0 Jason Song over 4 years ago in reply to Billyjoe Pecson

TI__Mastermind 23361 points

Hi Billy,

Let me check on this, and I will get back to you by 11/20.

Regards,
Jason

0 Jason Song over 4 years ago in reply to Jason Song

TI__Mastermind 23361 points

Hi Billy,

We can also help with SN29500, but we are not very familiar with what are the things needed for IEC61709.

Regards,
Jason Song

0 Billyjoe Pecson over 4 years ago in reply to Jason Song

Prodigy 160 points

Hello Jason,

Thank you for your reply.

This information will help us a lot.

Thank you and best regards,

Billy

Power management

Power management forum

LP5907-Q1: FIT Rate input parameters