LM5001-Q1: LM5001-Q1 design question

user5913722

Part Number: LM5001-Q1
Other Parts Discussed in Thread: TPS61170-Q1, TPS61170, LM5000

My use case: input: 10v-14v, output:65V, output current < 20mA.

Can i use LM5001-Q1 boost mode? webench show that input voltage is not in range.

0 Zack Liu over 5 years ago

Dear Sir,

Do you need an automotive device? TPS61170 or TPS61170-Q1 could be configured as 65V output voltage, similar to below schematic:

0 user5913722 over 5 years ago

Hi,

i choosed LM5000, do u have LM5000 SPICE MODEL? can i use a DAC connected to FB to adjust output voltage? like this:

0 Zack Liu over 5 years ago in reply to user5913722

Hi,

I cannot see your picture. But yes. Use a DAC connected to FB to adjust Vout is a good idea.

Power management forum