This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM36011: Light will be darker when LED STROBE signal have a narrower high level

Part Number: LM36011

Dear TI

Our product use a led strobe signal to light up the torchlight.

The function will be fine when i set the reg(0x01) to 0x15. But i found that the brightness will be darker when LED STROBE have a narrower high level. This is question1

After testing, this issue will be solved in reg(0x01) to 0x1b. But will bring a new question, the light will show a flicker visible (bright to dark, and repeat) to the eye.

I will upload the issue video to the attachment.

Thanks.