Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 65 subscribers
  • Views 365 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM5041：The position of current sense with LM5041.

Chun Hung Chen
Intellectual 590 points
Part Number: LM5041

Hi TI Team

I have a question about the EVM of LM5041.

In EVM, the current sense in SCH of the LM5041.

The position is on the input side using a CT.

I don't know how to sense the current of the PUSHPULL transformer if the current is on the input side.

I think the current should be blown/under the MOSFET of the push-pull converter.

Is it right?