• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 187 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LM34936EVM: D1, D2

LM34936EVM: D1, D2

Kuramochi Tadahiko
Guru 28715 points
Part Number: LM34936EVM

Hi,

How is progress of following thread?

https://e2e.ti.com/support/power-management/f/196/t/858423

Best Regards,

Kuramochi

  • 0
    TI__Guru 68675 points

    Hi Kuramochi-san,

    Sorry for the delay.  I just replied in that thread and the two diodes are used on the EVM, although it is not necessary.   Note that having the two diodes will not make the circuit performance worse, but the benefits are pretty limited.  I would like to remove them to save the BOM cost.  Sorry for the confusion. 

    Thanks,

    Youhao Xi, Applications Engineering