This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM36011: Jittering Error

Part Number: LM36011

We are using the LM36011 to drive LED’s in a flash application.

The driver is in IR mode and according the spec the strobe input is level sensitive.

We supply a 10kHz PWM signal to the Strobe input. One out of 4 or 5 pulses shows a ~1us error. When I change the pulse width or the frequency the error stays ~1us.


Do you have suggestions to solve this issue?