This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM22678: Buck Controller Feed Back Control not working

Part Number: LM22678

Dear Sir/Mam,

We are using the Part for LM22678TJE-ADJ/NOPB 5V generation. While giving the input at 12V, output voltage generated for 5V. But if iam increasing the input voltaeg from 12V to 28V means output voltage also increased. So Feed back not controlled the output voltage.

Designed parameters are given below



Feed Back Voltage = 1.285V