• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 136 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ35100: EOS Mode & ICC_ACC_AVE and ICC_ACCU Differences.

Manivannan M
Prodigy 130 points
Part Number: BQ35100
Other Parts Discussed in Thread: BQSTUDIO

Hi, 

  1. In the page number 5 of datasheet it is given that ICC_ACC_AVE is 0.3uA. What is the load pulse and sleep duration considered for arriving at this average current.
  2. In the page number 6 of datasheet  it is given that ICC_ACCU is 130uA. Does this mean BQ35100 will consume 130uA during the high load pulse?
  3. what is the difference between ICC_EOS_Burst and ICC_EOS_Gather?
  4. BQStudio IDE -  Will IDE support programming of tadiron battery Li-SOCl2  MPN # TL5930/T?  if not readily supported what is the programming procedure for the given tadiron battery.

Regards

Manivannan