1. My customer use the TPS62568 for Vin= 5V,Vout =1.8V and Iout= 400mA.
2. Could you please help me double check with the schematic?
3. Especially checking the selection of 22uf input capacitor and inductor.
- The GPN of input 22uf capacitor is 0805X226M100NT and it is a ceramic cap which is different from the Tantalum cap used in the EVM.
- The GPN of the inductor is WPN252012H2R2MT or WPN252012H2R3MT. The datasheet of the inductor is shown below.WPN252012H Series.pdf
4. I think that changing the type of input capacitor won’t cause any risk and the inductor selection is OK.
Could you please help me double check that?