• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 363 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ24298: Q4 question

BQ24298: BQ24298 enter HIZ mode

Trong Le
Intellectual 1595 points
Part Number: BQ24298

Hi support team,

My customer is testing the BQ24298EVM. They used the resistor 220R between ILIM pin and ground. According to the engineer, bq enter HIZ mode automatically every time they plug the charger in. Input current limit is set to 100mA ( highlighted below). Even they clear HIZ mode then plug charger again, it always be like that.

Please help to advise. Thank you.

Best regards,

Trong Le