Other Parts Discussed in Thread: PMP10739, UCC28722
Hi,
I previously asked a question about UCC28700 devices in the following thread.
I am considering using the configuration of the PMP10739 reference design with the following specifications.
However, I do not know how to select circuit constants in this configuration.
Is there any reference material to determine any circuit constants?
In particular, I would like to know how to select the constants of the inductor and input / output capacitor in the buck configuration.
(specification)
VIN: 140V
VOUT: 24V
IOUT: 1.5A
I am considering using the configuration of the PMP10739 reference design with the following specifications.
However, I do not know how to select circuit constants in this configuration.
Is there any reference material to determine any circuit constants?
In particular, I would like to know how to select the constants of the inductor and input / output capacitor in the buck configuration.
(specification)
VIN: 140V
VOUT: 24V
IOUT: 1.5A
Best regards,