How do I calcuate "SENSE Threshold Overdrive Voltage percent" to determine the "SENSE Pulse duration" in Figure 9 of the datahsheet? In my application, I have addition hysteresis resistor Rh.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How do I calcuate "SENSE Threshold Overdrive Voltage percent" to determine the "SENSE Pulse duration" in Figure 9 of the datahsheet? In my application, I have addition hysteresis resistor Rh.
Sam,
Figure 9 is not based on calculation but on data of sampled points on actual device units. Figure 9 shows a typical approximation. Overdrive is calculated as: Overdrive = | (V_sense / V_IT- - 1) x 100% |
Please let me know if you have additional questions.