LP5018: breathing feature question

user4782171

Part Number: LP5018
Other Parts Discussed in Thread: LP5569

Hi Team,

Need your help to confirm if the LP5018 will continuous keep run the breathing feature after programming even let the host CPU enter sleep mode?

Best regards,

Albert Lee.

over 4 years ago

0 Hardy Wu over 4 years ago

TI__Genius 12915 points

Hi Albert,

Sorry LP5018 have no auto breathing function. All animations can only be controlled by your CPU. If no I2C commands continuously sent to IC, it would stay at the state of latest command.

0 user4782171 over 4 years ago in reply to Hardy Wu

TI__Intellectual 1560 points

Hi Hardy,

Thanks and do we have similar channels LED driver product but with engine control which is suitable this functional requirement to recommended ?

Best regards,

Albert Lee.

0 Hardy Wu over 4 years ago in reply to user4782171

TI__Genius 12915 points

Hi Albert,

Sorry that we do not have 18 channels device with engine control. LP5569 can support 9 channels. Maybe customer can use 2 pcs.

Power management

Power management forum

LP5018: breathing feature question