This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS23754EVM-383: TPS23754EVM-383: TPS23754EVM-383 power consumption of active rectifyer

Part Number: TPS23754EVM-383

Sorry, I clicked the wrong button. It is not resolved. Here is my schematics: If you can't see it, please let me know, how to send it to you.

  • Hello Bjorn,

    I cannot view the schematic. If you accept my connect request you can send it over private messanger. 

    But again, If you are talking about the secondary FETs, you can use the FET you mentioned. I will say it essentially moves the power loss from the gate to the drain-source, but that is the trade off for higher switching frequency.

    If you are talking about the primary FETs, that will not work for Q1 since the FET shown is a N channel. 

    If this post answers your question, please indicate so by marking this thread as resolved. Thank you.




    Michael P.

    Applications Engineer

    Texas Instruments