CCS/CSD95372AQ5M: About Stencil Opening size

Tsukui Yusuke

Guru 21930 points

Part Number: CSD95372AQ5M

Tool/software: Code Composer Studio

Hi,

Could you tell me the dimensions of the red circle point?
Customers need that information for layout design.

Regards,
Yusuke

over 4 years ago

0 Brett Barr1 over 4 years ago

TI__Mastermind 18200 points

Yusuke-san,

Thanks for posting. I've reached out to our packaging engineers; I hope to have an answer for you with 24 hours. I will let you know if it will be longer.

0 Brett Barr1 over 4 years ago in reply to Brett Barr1

TI__Mastermind 18200 points

Yusuke-san,

I apologize - I accidentally clicked "TI thinks resolved" even though I recognize I have not resolved your issue. Fear not, I'm still looking into this and will get back to you tomorrow. If I have not, feel free to reject my "resolution"

0 Brett Barr1 over 4 years ago in reply to Brett Barr1

TI__Mastermind 18200 points

Yusuke-san,

The radius of the curvature is 0.125 mm.

0 Tsukui Yusuke over 4 years ago in reply to Brett Barr1

Guru 21930 points

Hi Barr,

Thank you for your kind support.
Are both A and B dimensions 1.25mm?
Would you please describe the 1.25mm location in the sent picture?

Regards,
Yusuke

0 Brett Barr1 over 4 years ago in reply to Tsukui Yusuke

TI__Mastermind 18200 points

Yusuke-san,

I assumed you were asking for the radius of the curve around the two edges...what dimension were you asking for?

Yes, both radii have a dimension of 1.25mm.

Power management

Power management forum

CCS/CSD95372AQ5M: About Stencil Opening size