I am doing thermal analysis for this part. I need data that is based on my actual operating conditions, which are 250 KHz, 12v line, 5v load, and 3A load curent.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I am doing thermal analysis for this part. I need data that is based on my actual operating conditions, which are 250 KHz, 12v line, 5v load, and 3A load curent.
Hi Ernest,
WEBENCH would be a good starting point for an analysis like this. If you need bench measurements, I suggest getting an EVM then modifying it to match your requirements.
I made a quick design with your requirements in WEBENCH and below is a link to it.
https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=B04D3023BA9DA774
Best Regards,
Anthony