Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61200: How to provide 3.3 V on the OUTPUT

Part Number: TPS61200

I am making a low power device where I have used TPS61200 which takes input from Lithium Battery (3.5 - 3.7 V) and the desired output should be 3.3V. I have attached the connection diagram above. The output voltage after testing I am getting is 6V and not 3.3V so please can anyone tell me how to resolve this?

(The EN pin is connected with REED Switch and Vin is from Lithium Battery)

Kunal