Other Parts Discussed in Thread: LM5122
Hi Team,
I have some ideas to make a cascaded boost converter like below.
Spec may be
1. 12V to 48V(EV) ; 2. 80V to 380V(grid-connected)
I know we have corresponding boost converter could meet the spec, but I think cascaded topology may have some advantage like small filter size.
Could you suggest me the appropriate solution to achieve boost converter in business and technical side(cost/size)? (may boost converter or boost controller)
One more question could I use the one converter or one controller to achieve cascaded topology if both duty cycle of switch is same?
Roy