• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Subscribers 62 subscribers
  • Views 462 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS55340-Q1: output voltage: Pin open

AMARNATH M
Prodigy 155 points

Part Number: TPS55340-Q1
Other Parts Discussed in Thread: TPS55340

Hi ,

Please let me know the effect on TPS55340-Q1 output voltage for below conditions.

  1. SYNC Pin is open: 
  2. FB Pin is open:
  3. FREQ Pin is open: 
  4. SS Pin is open: 
  5. COMP Pin is open: 

Regards, 

Amar

  • 0
    Prodigy 155 points

    Hi ,

    Please let me know the effect on TPS55340-Q1 output voltage for below conditions.

    1. SYNC Pin is open: 
    2. FB Pin is open:
    3. FREQ Pin is open: 
    4. SS Pin is open: 
    5. COMP Pin is open: 
    1. SYNC Pin shorted to ground: 
    2. FB Pin shorted to ground:
    3. FREQ Pin shorted to ground: 
    4. SS Pin shorted to ground: 
    5. COMP Pin shorted to ground: 

    Regards, 

    Amar

  • 0
    TI__Expert 7450 points

    Hi Amar,

    Thanks for your interest in TPS55340.

    1. Sync could be triggered randomly. You could have some transient on Vout.

    2. Controller will not work. You have Vout~=Vin if it is a boost.

    3. Controller will not work. You have Vout~=Vin if it is a boost.

    4. You have no soft start for the converter startup.

    5. You have no compensation so no stable Vout.

    Please let me know if you have more quesitons.

    Thanks,

    Yinsong

  • 0 in reply to Yinsong Cai1
    Prodigy 155 points

    Hi Yinsong,

    Thanks for your inputs. Hope you have answered for pin open conditions.

    Also please let me know the effect on TPS55340-Q1 output voltage for pin shorted to ground conditions.

    1. SYNC Pin shorted to ground: 
    2. FB Pin shorted to ground:
    3. FREQ Pin shorted to ground: 
    4. SS Pin shorted to ground: 
    5. COMP Pin shorted to ground: 

    Regards, 

    Amar

  • 0 in reply to AMARNATH M
    TI__Expert 7450 points

    Hi Amar,

    1. It works at the FREQ defined frequency.

    2. COMP is clamped high. It operates at max duty cycle.

    3. Frequency goes very high.

    4. COMP is clamped low. You have Vout~=Vin if it is a boost.

    5. COMP is clamped low. You have Vout~=Vin if it is a boost.

    Thanks,

    Yinsong

  • 0 in reply to Yinsong Cai1
    Prodigy 155 points

    Hi Yinsong,

      Thanks for your inputs. 

    Regards, 

    Amar