• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 212 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS51604: Output drive current

PAN-M
Mastermind 8375 points
Part Number: TPS51604

Dear all.

Would you please teach me about DRVH and DRVL output current of TPS51604?

Regards,
PAN-M

  • 0
    TI__Mastermind 24075 points

    Hi PAN-M, 

    The sourcing and sink resistance of gate drive is available in spec table on datasheet page 4. 

    The sourcing and sink current can be calculated as (VDD-Vgate)/Rgate

    For example, the typical sourcing resistance of DRVL is 1.5ohm, the VDD voltage is 5V, the initial gate voltage is 0V. Then the initial sourcing current is (5V-0V)/1.5ohm=3.33A.

    With gate voltage increases, the sourcing current decrease. 

    Thanks

    Qian