Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 175 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF02: set REF02 to 5.12V

Lorenzo Raschi
Prodigy 50 points
Part Number: REF02

Hello,

I need to trim REF02 in order to have a 5.12V voltage output. In the datasheet there isn't a formula to calculate the resistive voltage divider on TRIM pin.

Can someone provide me the formula, please?

Best regards,

Lorenzo