Due to the U.S. Thanksgiving holiday, please expect delayed responses during the week of 11/22.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/LMZ31704: Design cannot be created

Part Number: LMZ31704

Tool/software: WEBENCH® Design Tools


If the output is less than 0.8V, no design is generated in Webench.

How do you provide a reference design at an output below 0.8V?

Best Regards.