CSD13202Q2: spice/tina model

Amr Elhadidy

Expert 1005 points

Part Number: CSD13202Q2
Other Parts Discussed in Thread: TINA-TI

hello,

may you please send the spice/Tina model of the mosfet?

Kind Regards,

Amr Elhadidy

over 3 years ago

0 John Wallace1 over 3 years ago

TI__Mastermind 29525 points

Hi Amr,

Thanks for your interest in TI FETs. The models can be found in the CSD13202Q2 product folder here:

0 Amr Elhadidy over 3 years ago in reply to John Wallace1

Expert 1005 points

Hi John,

Thank you very much for your reply.

Kind Regards,

Amr

0 Chris Bull over 3 years ago in reply to Amr Elhadidy

TI__Expert 6815 points

Amr,

Did you look at the web to try to find the models before John's reply?

The reason I ask is we recently changed how our products are displayed on TI.com and I would be interested to know if you went looking for the model and was unable to locate it and your thoughts on the new layout of th ewebpage.

0 Amr Elhadidy over 3 years ago in reply to John Wallace1

Expert 1005 points

Hello John,

I was trying to download the TINA model but unfortunately it can't be downloaded. Could you check it please?

Thank you,

Amr

0 John Wallace1 over 3 years ago in reply to Amr Elhadidy

TI__Mastermind 29525 points

Hi Amr,

I had no problem downloading the TINA-TI model. Please go to the product folder and under Design & development click on Design tools & simulation. There you will find links to download the TINA-TI and PSpice models. Please note, the TINA-TI model is encrypted and the PSpice model is unencrypted. You can easily create a macro in TINA-TI from the unencrypted PSpice model as shown in this app note:

0 Amr Elhadidy over 3 years ago in reply to John Wallace1

Expert 1005 points

Hello John,

It is now fine but the downloaded file first is an html document. Then I changed the extension to .tsm instead of .html. It was successfully inserted in TINA.

Thank you very much.

Kind Regards,

Amr

0 John Wallace1 over 3 years ago in reply to Amr Elhadidy

TI__Mastermind 29525 points

Hi Amr,

You are welcome. Glad I could help. I will close this thread.

0 Amr Elhadidy over 3 years ago in reply to Chris Bull

Expert 1005 points

Hello Chris,

I don't remember exactly. I didn't find the model within the Tina simulation programm then I believe I showed quickly on the website and have seen only the pspice model. I have chekced the website now to see and it looks so without the TINA model:

The website is very well organized. However, for the reference designs, I think it is necessary to add some table with each design showing what the inputs and outputs are. These are helpful during navigation through the projects to find out the suitable one.

As far as I know TINA has mainly the SPICE models of ti products. I would highly suggest that ti adds a TINA model or at least a simplified model of the IC that is capable with TINA which would save alot of searching time.

Regards,

Amr

0 John Wallace1 over 3 years ago in reply to Amr Elhadidy

TI__Mastermind 29525 points

Thanks for the feedback. We will pass this onto the digital marketing team. I am going to close this thread.

Power management

Power management forum

CSD13202Q2: spice/tina model