Hello,
customer needs the tlv71333 non-p version. Currently it is not orderable and not listed in the datasheet.
Regards, Holger
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
customer needs the tlv71333 non-p version. Currently it is not orderable and not listed in the datasheet.
Regards, Holger
Hello JCHK,
customer don't need it. He uses a 47uF cap at the output and fears that the active pull-down can make some trouble.
Regards, Holger
Hi Holger,
The active pull-down when the device is disabled is ~120Ohm.
The maximum recommended COUT is 100uF so your customer appears to be well within the recommended operating range for the device.
Regards,
ok I will discuss this with customer. Btw, do you plan to release a non-p version? Is it still on your roadmap?
Regards, Holger
Hi Holger,
It is always an option if there is enough demand. So for we don't see much of a pull for the non-P version.
Please follow up directly if you would like to see this project started.