Other Parts Discussed in Thread: ADS8885, , OPA333, REF5045
Hi,
could you please review our ref voltage circuit for ADS8885?
Thanks!
Best regards,
Alen
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI Alen,
I see it forms an RC filter. That is fair.
I have not tried this approach on the bench and my bench capabilities are limited. I would still add the 1uF directly on the Out_F output due to stability.
The REF5045 also requires this capacitor. It is not shown in that figure but it does appear in the schematic.