• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 151 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65917-Q1: Power Estimation Tool Locked Cell

Renan Santos Adriano
Genius 16500 points
Part Number: TPS65917-Q1

Hi Team,

My Customer is currently using the "TPS65917 Power Estimation Tool" and wanted to vary the "L DCR" value (column F), unfortunately this is a locked column. Is there a possibility that my customer can change this?

Regards,

Renan

  • 0
    TI__Genius 17380 points

    Hi Renan,

    The "L DCR" column is informative only, it is not used in any calculations. The tool is filling in the Pdis and Efficiency data columns from the validation data, interpolating where necessary if the request point is between validation points (for example 0.92 V is between 0.7V and 1.05V test points). 

    You should be able to estimate the difference between the tool results and the expected results with different inductors by subtracting out the expected Pdis.