HI
TPS65917 ,
How do I2C control power down?
Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Neal,
Check out the table in the datasheet labeled "OFF Requests". You can power down using GPIO5 (POWERHOLD), GPIO1 (if configured as RESET_IN), Long-press on PWRON pin, etc. The only way to shutdown via I2C is if you are using the DEV_ON bit with PWRON.
Thanks,
Nastasha