Hi,
I am designing the battery charging circuit using IC BQ25892. However, the problem is that my VSYS voltage is 2.65V. I do not know why? Can you help me? Thank you very much.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Ngo,
Please visit https://e2e.ti.com/support/power-management/f/196/t/890624 for I2C controlled BQ2560X: Schematic Review and PCB Layout Design Tips.
Please visit https://e2e.ti.com/support/power-management/f/196/t/874557 for BQ2589X: Schematic Review and PCB Layout Design Tips and https://e2e.ti.com/support/power-management/f/196/t/875386 for BQ2589x/BQ25898x FAQs. Please also check the register readings and see if there's any faults or DPM etc , especially for REG0B and REG0C.
Thanks,
Ning.