Other Parts Discussed in Thread: LP87332A-Q1
Hi.
I have two questions.
1.
According to document SLVUAS4E ('TPS65917-Q1 and TPS65917-Q1 Users guide~'), SMPS1 and SMPS2 are set to 1.06V by OTP setting.
But, when i tested, SMPS1 and SMPS3 are set to 1.15 and SMPS2 is set to 1.06V.
Because i use TDA3x, i need two 1.06V for supplying DSP_EVE_AVS and CORE_AVS voltage.
I wonder where the difference comes from.
2.
DSP_EVE_AVS and CORE_AVS have same power.
So, is it possible to supply 1.06V by one SMPS not seperate SMPSs.