• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 348 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A11: Output voltage option

Shinya Sawamoto
Expert 5295 points

Part Number: TPS7A11

Hello team,

I have a couple of question about TPS7A11 output voltage option.
1) It looks TPS7A1108(0.8V option) has only PDRV(WSON) and not PYKA(BGA) on the datasheet. Isn't it just a miss-information or can we order TPS7A1108PYKA actually?
2) Output option for 3.3V can not be available (=3.0V is maximum), is it correct?

Regards,
S.Sawamoto 

  • 0
    TI__Guru 50190 points

    Hi Sawamoto-san,

    I can check with the team to see if we can provide samples of the TPS7A1108PYK. I do not see an active project to release this voltage option at this time.

    for question #2, 3.0V is the maximum VOUT for this device. it is what we refer to as a LILO (Low Input/Low Output) LDO. 

    I hope this answers your question.