This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A90: soft start, noise reduction, feed foward caps

Part Number: TPS7A90

I'm confused on whether SS_CTRL should have been tied to VIN if I use a C_FF cap? I need a ramp time greater than 0.2ms and chose SS_CTRL = GND and C_NR/SS = 10nF for a ramp time of approximately 1ms.  But I also wanted to reduce the output noise to very low levels so I added a 10nF C_FF.  Can I use the following configuration below?  The layout example showed SS_CTRL tied to ground with a cap for C_NR/SS and C_FF.  

SS_CTRL = GND

C_NR/SS = 10nF

C_FF = 10nF