Dear SIR:
May I have some confirming Item for TPS7A0333PDBVR ?
Regarding TPS7A0333PDBVR Original circuit (5V to 3.3V ) : Pin 1 (VIN ) we connect to 5V STANDBY ,
Pin 2 (GND ) we connect to GND,
Pin 3 (EN ) we connect to (5V through 10K//10K voltage divider circuit , Pin3 get 2.5V ),
Pin 4 (NC) No connect
Pin 5 (OUT) Got 3.3V
If we change Pin3 as below [New Circuit] ,Is it OK or have any side effect ?Would you have any advice ?
TPS7A0333PDBVR Original circuit (5V to 3.3V ) : Pin 1 (VIN ) we connect to 5V STANDBY ,
Pin 2 (GND ) we connect to GND,
Pin 3 (EN ) we connect to (pull High connect to Pin1(VIN) 5V by 10K , Pin3 get 5V ),
Pin 4 (NC) No connect
Pin 5 (OUT) Got 3.3V
Thanks
Original circuit:
New circuit: