UA78M: Power LDO selection

Dheeraj yadav

Part Number: UA78M

Hi,

can I use this LDO UA78M33CDCYR after transformer output and use this 3.3V to power up opamp SI8920BC-IP.

https://www.ti.com/lit/df/tidrzh1/tidrzh1.pdf?ts=1595313548751&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FTIDA-010048

over 5 years ago

0 JCHK over 5 years ago

TI__Guru 50190 points

Hi Dheeraj,

It looks like you have 28VIN and 3.3VOUT. Looking at the Op-amp datasheet the total input and output current is around 10mA. So the power dissipation would be around 250mW which should be OK.

I hope this answers your question.

Power management

Power management forum

UA78M: Power LDO selection