Hi,
I got a quick questions here, as shown in the TI.com, we have several socket name, like TPS65132 A/B/L/S/W.
But there is only B/W/L version's user guide.
Do we have the S version's user guide?
Thanks.
Best regards
Mason
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I got a quick questions here, as shown in the TI.com, we have several socket name, like TPS65132 A/B/L/S/W.
But there is only B/W/L version's user guide.
Do we have the S version's user guide?
Thanks.
Best regards
Mason
Hi Mason,
Thanks for your question. Let me look into it and give you an answer within the next few days.
Best,
Grant
Hi Mason,
You can find TPS65132 S version user's guide t the link below.
Kind Regards,
Liaqat
Hi Liaqat,
thanks a lot! there is another question, different from the project i send you via email, what is the test standard for testing Iq? My customer want to know the current in this situation: TPS65132 works in standby, without any load.
i'm not sure is this the Iq testing application scenario? if not, could you tell me the Iq in the customer requirement? feel free to tell me if you have any suggestions.
one more question, do we have a max value of the Iq?
Many thanks.
Best regards
Mason
Hi Mason,
Iq is normally measured in the automated testing in an open loop configuration where device is not switching. So this Iq is of 0.54A is not under customer conditions and I will need to measure it under customer condition to find what it is. I will go to lab on Monday measure it.
Kind Regards,
Liaqat
Hi Liaqat,
Thanks a lot! BTW, do we have a max Iq value since 0.54mA is just a typical value?
Best regards
Mason
Hi Mason,
We do not have a max. value specification for this parameter and all ATE data is measured under the typical conditions mentioned in the datasheet. I will see if I can measure this on few devices in the lab at temperature of 85C which should give an idea of max value.
Kind Regards,
Liaqat