Hi Team,
R&D want to Interleave (Two phase)config as 1 out, How to design feedback circuit? tks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
R&D want to Interleave (Two phase)config as 1 out, How to design feedback circuit? tks!
Hi Kevin,
The LM5034 is a two phase interleaved controller.
For single output configuration COMP1 is shorted to COMP2 and controlled by the voltage control loop opto coupler. See page 21 of the datasheet.
Regards
Peter