LMZM33603RLRR is used in our design to power a 3.3V module @ 2A
Kindly review the schematics and layout attached, and provide your valuable comments ASAP.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Edit: Updated with my review
The circuit looks okay and follows the Table 1 'Required Component Values'.
Is layer 2 on the PCB layout full PGND plane? If not then I would recommend increasing the PGND ground plane for better thermal relief. Other than that the PCB layout looks okay too.