• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 395 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP5012: LP5012, how to control brightness of the LED independently

FREDJ ROUATBI
Prodigy 20 points
Part Number: LP5012

How to control the LED brightness separably for each LED.

Which registers to set to assign a PWM signal to each LED ?

  • 0
    TI__Expert 6675 points

    Hi, guy,

    Reference to page 5 of the datasheet(which is attached following), the LP5012 is designed with dependent color mixing and intensity control. you can control the LED brightness separably for each LED by the color-mixing.

    The PWM signal is determined by color-mixing and intensity control, but you can set up the color-mixing register to control each LED, which you can refer to the following pic.

    Best regard

    Monet Xu