Other Parts Discussed in Thread: TPS7A85
How does the voltage sense feature (pin #2) work? I am planning to build an LDO board using this device and power my board with it. There will be a wire connection between the LDO board and my board. I want to ensure that the voltage at the power plane, which is on an inner layer in my board, is exactly (or very close) to the LDO output voltage. If I hook up the boards as shown in the picture below, will I achieve my goal? There was a zero ohm resistor connected between the Vout trace and SNS pin on TI eval board. In this case, the power plane acts like the zero ohm. Will it work? EVB stands for evaluation board.