BQ20Z65-R1_BQEVSW-SW: INR18650P26A BATTERY CONFIGURATION

user6432822

Part Number: BQ20Z65-R1
Other Parts Discussed in Thread: BQEVSW, BQ20Z65, GPCCHEM

Hi,

I have bq20z65 and i want to configure this for Molicell INR18650P26A battery. How i can do this? How i can find parameters for entering to BQEVSW? Thanks for any help!

over 4 years ago

0 Matt Sunna over 4 years ago

TI__Guru* 81024 points

Hi,

I do not have much experience with the BQEVSW that is used on the older gauges, but there should be a Chemistry Selection tool. Look under the BQEasy tab.

Best regards,

Matt

0 user6432822 over 4 years ago in reply to Matt Sunna

Prodigy 20 points

Hi again,

In this Chemistry Selection tool, can we add our battery parameters? (if yes, how?) Also i couldnt find a documentation about bqevsw program, how i can find? ( document about how to use this program)

0 Matt Sunna over 4 years ago in reply to user6432822

TI__Guru* 81024 points

Here is a document on updating the chemistry database for the software: https://www.ti.com/lit/ug/sluuc94/sluuc94.pdf

If your battery's chemistry is not in the database, you will need to use the GPCCHEM tool. The documentation on how to use this tool is located here: www.ti.com/.../GPCCHEM

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Power management

Power management forum

BQ20Z65-R1_BQEVSW-SW: INR18650P26A BATTERY CONFIGURATION