The datasheet recommends feedback resistors in the range of 1k to 10k. This is quite low compared to typical power devices. What would be the consequence of choosing values above 10k?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The datasheet recommends feedback resistors in the range of 1k to 10k. This is quite low compared to typical power devices. What would be the consequence of choosing values above 10k?
HI
total value below 100k should be OK, too large voltage divide will make FB sensitive to the noise.
Thanks