ADVANCED-BQMTESTER: Review modifications for replace EV2300

Go Vin

Hello,

i am in the process of replacing EV2300 in ADVANCED-BQMTESTER. I have made some changes in ADVANCED-BQMTESTER. Please help by reviewing following diagram I have attached the same for your convenience. i have marked the changes in red.

TI diagram and modified diagram.

Thank you

over 3 years ago

0 Wyatt Keller over 3 years ago

TI__Guru** 102415 points

Hello Go,

Yes you can develop your own communication using I2C and those connections should be okay if you are using an I2C based gauge.

Sincerely,

Wyatt Keller

0 Go Vin over 3 years ago in reply to Wyatt Keller

Intellectual 330 points

Hello Wyatt,

It works. Thank you sir.

Best Wishes

Power management

Power management forum

ADVANCED-BQMTESTER: Review modifications for replace EV2300