This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27421EVM-G1A: About the SOC percentage

Part Number: BQ27421EVM-G1A
In my application, sometimes battery is not connected (or battery get's switched off, based on internal protection). However SoC is shown as 100%, I suspect this is due to charging voltage maing fuel gauge active.
Is above behaviour OK for fuel gauge? I would assume that fuel gauge to report zero (no SoC) is battery is dsconnected). Note my BIN is connected to GND thru 10kohm resistor.
Thank you,