This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2611: Miniaturization review

Part Number: LM2611
Other Parts Discussed in Thread: LM2664

Hi sir,

For AN–1203 LM2611 Demo Board,

In condition of Vin5V、VOUT-5V、Iout≦300mA, this EVM use inductors of CR32-220(Sumida).

https://www.ti.com/lit/ug/snva041b/snva041b.pdf?ts=1603170693055&ref_url=https%253A%252F%252Fwww.ti.com%252Ftool%252FLM2611EVAL

CR32-220 is too big, and take up a lot of PCB space.

In my circuit, the Iout is 1mA, can I use small chip inductor in my case?

are there any restrictions?

For example, DC Current、DC Resistance, other parameters and so on.

Thanks.