This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD95372BQ5M: CSD95372B

Part Number: CSD95372BQ5M

Hi,

i wanna design a mppt power stage for a project. where i have 200volt max PV input and a 48volt lithium battery system need a current around 100amp. I was reading the multiphase buck design form. And wonder if i could use the sampe power circuit for it.

Are there some more details how i can design / calculate the parts for such a power stage ?

many thanks

cheers

Michael

  • Hi Michael,

    Thank you for your interest.

    I think you may first think about the topology, if you need isolation or not.

    Our power stage mainly for lower Vin applications, such as 12-24V Vin. So if you have isolation in your circuit, you may still be able to use the power stage on the output side (secondary side). And I can help you with your design if that's what you want.

    If you need non-isolated solution, unfortunately my group doesn't have power stage for high voltage applications, such as >100Vin.

    Best,

    Qingquan