Hi,
Could you please tell me the maximum output current if converting 3.3V to 3.3V?
Best regards,
Kato
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Could you please tell me the maximum output current if converting 3.3V to 3.3V?
Best regards,
Kato
Hi Kato,
This is a buck converter and therefore; the input voltage needs to be higher than the output voltage. Please remember that we don't have 100% efficiency and you need to account for the losses.
Regards,
Febin
Hi Febin-san,
Thank you for the prompt reply.
Could you please tell me the maximum output voltage and current which can be set if working TPS62260 at 3.3V?
Best regards,
Kato
Hi Kato,
Unfortunately, I do not have the EVM in our local inventory and therefore; will not be able to take any measurements at the moment.
If there is a possibility that you can test this on the EVM, it would be great.
I guess for a Vin of 3.3V, a maximum Vout of 3V can be achieved at full load. But please verify this on an EVM.
Please hit "Resolved" if you do not have further questions.
Regards,
Febin