• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 62 subscribers
  • Views 119 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62260: Converting 3.3V to 3.3V

Sadanori Kato
Guru 36490 points
Part Number: TPS62260

Hi,

Could you please tell me the maximum output current if converting 3.3V to 3.3V?

Best regards,
Kato

  • 0
    TI__Mastermind 19210 points

    Hi Kato,

    This is a buck converter and therefore; the input voltage needs to be higher than the output voltage. Please remember that we don't have 100% efficiency and you need to account for the losses. 

    Regards,

    Febin

  • 0 in reply to Febin
    Guru 36490 points

    Hi Febin-san,

    Thank you for the prompt reply.

    Could you please tell me the maximum output voltage and current which can be set if working TPS62260 at 3.3V?

    Best regards,
    Kato

  • 0 in reply to Sadanori Kato
    TI__Mastermind 19210 points

    Hi Kato,

    Unfortunately, I do not have the EVM in our local inventory and therefore; will not be able to take any measurements at the moment.

    If there is a possibility that you can test this on the EVM, it would be great.

    I guess for a Vin of 3.3V, a maximum Vout of 3V can be achieved at full load. But please verify this on an EVM.

    Please hit "Resolved" if you do not have further questions.

    Regards,

    Febin